RAM, Please help me! |
RAM, Please help me! |
May 3 2009, 02:16 PM
Post
#1
|
|
kthxbai Group: Official Designer Posts: 2,832 Joined: Feb 2008 Member No: 621,203 |
<----- total RAM newb.
I want to upgrade my RAM to make running things faster. Right now I have this amount of RAM: It's not working for me. I want more. I did the Crucial.com system scanner, and these were my results: ^Notice how I have 2x 512MB RAM things, but somehow my total RAM is 960.. ? weird. It told me the kind of RAM I needed, and it even gave me the option to buy some of that kind. and I thought, "Wow! That's so cheap! *big smile*" BUT, I saw on a Tech website that multiple people said Crucial's prices were absurdly high. QUOTE("cfitzarl") I usually go to www.crucial.com and use their database to find out what ram a pc needs, wouldn't buy if from them tho, way too pricey!!!! Their 256 Chip was ~ $50.00 that was ddr2, ridiculous! Is it really "ridiculous"? QUOTE("Rik") Well i did say they were way too pricey!!!!!! I just use their database for reference only!! QUOTE("F1N3ST") 200$/GB I Expect it to be made of gold! Where can I get cheaper RAM that will work for my computer? |
|
|
Jun 10 2009, 01:37 AM
Post
#2
|
|
Newbie Group: Member Posts: 6 Joined: Jun 2009 Member No: 731,575 |
Your motherboard should look like this, you replaced the ram in the same slots; if you bought 4 sticks 1GB each you put one in each slot completely, you can go to system properties from the control panel and it'll tell you how much ram you have installed. Granted if you bought 4gb chances are you're only allowed to use up to 75% of it depending on your OS. Yes, sometimes pressure is necessary to fit new ram. That's where you'll want to install your graphics card, with the EVGA label facing upward. You don't have to connect a pci plug from your psu because your graphics card doesn't require that much power. after plugged in, you should be able to run the cd, restart the computer and be fine. If your monitor is VGA you connect one end of the blue cord to the monitor and the other to the graphics card. or if you want the subtle differance of using dvi, connect the adapter to the end of the vga cord that you'll connect to the graphics card.. |
|
|
Jun 10 2009, 02:15 AM
Post
#3
|
|
kthxbai Group: Official Designer Posts: 2,832 Joined: Feb 2008 Member No: 621,203 |
Your motherboard should look like this, you replaced the ram in the same slots; if you bought 4 sticks 1GB each you put one in each slot completely, you can go to system properties from the control panel and it'll tell you how much ram you have installed. Granted if you bought 4gb chances are you're only allowed to use up to 75% of it depending on your OS. Yes, sometimes pressure is necessary to fit new ram. That's where you'll want to install your graphics card, with the EVGA label facing upward. You don't have to connect a pci plug from your psu because your graphics card doesn't require that much power. after plugged in, you should be able to run the cd, restart the computer and be fine. If your monitor is VGA you connect one end of the blue cord to the monitor and the other to the graphics card. or if you want the subtle differance of using dvi, connect the adapter to the end of the vga cord that you'll connect to the graphics card.. I'm sure that was extremely helpful to someone else, but that's not what mine looks like. I'm going to stop procrastinating and just take the pictures now :P |
|
|