New computer troubleshooting |
New computer troubleshooting |
![]()
Post
#1
|
|
![]() Senior Member ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Official Designer Posts: 5,880 Joined: Nov 2007 Member No: 593,382 ![]() |
I made the mistake of taking apart an old computer and putting it back together. i wanted to gain that experience so that when I come to building my own box from scratch I will understand how. Well I took everything apart and cleared all the dust, and then i put it back together and to my sunrise...it didn't work. I took another look inside all looked for mistakes but couldn't find anything. I did see that I had put the led light cables on the wrong spot on the mobo so I fixed it and tried again. Nothing. So I was wondering if someone could give me a checklist of things that could have gone wrong. When I pres the power button i don't even get a beep. All wires are plugged in. I did remove the fan from the heat sink over the CPU and then put it back in. Could I have messed something up? I have never seen the latching mechanism for the heat sink so maybe it isn't secured. I appreciate the help.
|
|
|
![]() |
![]()
Post
#2
|
|
![]() Sarcastic Mr. Know-It-All ![]() ![]() ![]() ![]() ![]() ![]() Group: Staff Alumni Posts: 2,089 Joined: Dec 2003 Member No: 29 ![]() |
jcp if you have a soldering iron, you can fix it yourself. Just solder a 8-ohm resistor onto the technodrome of the front side bus to your CPU's flux capacitor.
|
|
|
![]()
Post
#3
|
|
![]() /人◕‿‿◕人\ ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Official Member Posts: 8,283 Joined: Dec 2007 Member No: 602,927 ![]() |
jcp if you have a soldering iron, you can fix it yourself. Just solder a 8-ohm resistor onto the technodrome of the front side bus to your CPU's flux capacitor. Good plan. Joseph, either you didn't hook up the PSU right, or you fried the motherboard. See any sparks, or smell anything burning? |
|
|
![]() ![]() |